Butalbital,Aspirin,Caffeine,and Codeine Phosphate Capsules
»Butalbital,Aspirin,Caffeine,and Codeine Phosphate Capsules contain not less than 90.0percent and not more than 110.0percent of the labeled amounts of butalbital (C11H16N2O3),aspirin (C9H8O4),caffeine (C8H10N4O2),and codeine phosphate (C18H21NO3·H3PO4·½H2O).
Packaging and storage— Preserve in tight,light-resistant containers.
Identification— The retention times of the butalbital,aspirin,caffeine,and codeine peaks in the chromatograms of the Assay preparationcorrespond to those of the butalbital,aspirin,caffeine,and codeine peaks in the chromatograms of the Standard preparation,as obtained in the Assay.
Dissolution á711ñ
Medium: water;1000mL.
Apparatus 2: 50rpm.
Time: 60minutes.
0.01M Phosphate buffer,pH2.5Buffer,Mobile phase,and Salicylic acid solution— Prepare as directed in the Assay.
Dilute salicylic acid solution— Transfer 5.0mLof Salicylic acid solution,prepared as directed in the Assay,to a 50-mLvolumetric flask,dilute with pH2.5Bufferto volume,and mix.Pass through a suitable filter of 0.5µm or finer porosity.
Aspirin standard stock solution— Prepare a solution of USP Aspirin RSin a mixture of pH2.5Bufferand Dissolution Medium(1:1)containing a known concentration of about 0.16mg per mL.Use this solution within 24hours.
Standard preparation— Dissolve accurately weighed quantities of USP Butalbital RS,USP Caffeine RS,and USP Codeine Phosphate RSquantitatively in Aspirin standard stock solutionto obtain a solution having known concentrations of about 0.16Jmg of USP Butalbital RS,0.16J¢mg of USP Caffeine RS,and 0.16J¢¢mg of USP Codeine Phosphate RSper mL,J,J¢,and J¢¢being the ratios of the respective labeled amounts,in mg,of butalbital,caffeine,and codeine phosphate to the labeled amount,in mg,of aspirin per Capsule,sonicating and shaking the solution,if necessary to achieve complete dissolution.Pass a portion of this solution through a suitable filter of 0.5µm or finer porosity.Use this solution within 24hours.
Chromatographic system— Proceed as directed for Chromatographic systemin the Assay,except to inject 100µL,instead of 10µL,into the chromatograph,and to use Dilute salicylic acid solutioninstead of Salicylic acid solution.
Procedure— [NOTE—Use peak areas where peak responses are indicated.]Filter about 20mLof the solution under test through a suitable filter of 0.5-µm or finer porosity,discarding the first 2mLof the filtrate.Mix 5.0mLof the filtrate and 5.0mLof pH2.5Bufferto obtain the Test preparation.Separately inject equal volumes (about 100µL)of the Test preparationand the Standard preparationinto the chromatograph,record the chromatograms,using the 277-nm detector to record the caffeine and aspirin peaks and the 210-nm detector to record the butalbital and codeine responses,and measure the areas for the major peaks.Calculate the quantities,in mg,of caffeine (C8H10N4O2),aspirin (C9H8O4),and butalbital (C11H16N2O3)dissolved by the same formula:
2000C(rU/rS),
in which Cis the concentration,in mg per mL,of the appropriate USP Reference Standard in the Standard preparation;and rUand rSare the peak responses of the corresponding analyte obtained from the Test preparationand the Standard preparation,respectively.Calculate the quantity,in mg,of codeine phosphate (C18H21NO3·H3PO4·½H2O)dissolved by the formula:
(406.37/397.37)(2000C)(rU/rS),
in which 406.37and 397.37are the molecular weights of codeine phosphate hemihydrate and anhydrous codeine phosphate,respectively;Cis the concentration,in mg per mL,of USP Codeine Phosphate RSin the Standard preparation;and rUand rSare the codeine peak responses obtained from the Test preparationand the Standard preparation,respectively.
Tolerances— Not less than 75%(Q)of the labeled amounts of butalbital (C11H16N2O3),aspirin (C9H8O4),caffeine (C8H10N4O2),and codeine phosphate (C18H21NO3·H3PO4·½H2O)are dissolved in 60minutes.
Uniformity of dosage units á905ñ: meet the requirements.
Limit of free salicylic acid— [NOTE—Use glassware in this test.]
Solvent— Add 1mLof phosphoric acid to 1000mLof methanol,and mix.
Standard preparation— Prepare a solution of USP Salicylic Acid RSin Solventhaving a known concentration of about 0.0012mg per mL.Use this solution promptly.
Test preparation— [NOTE—Perform this test on the same day the powder is removed from the Capsules.]Transfer an accurately weighed portion of the powder remaining from the preparation of the Assay preparationin the Assay,equivalent to about 65mg of aspirin,to a 200-mLflask,add 100.0mLof Solvent,and shake for about 1minute.Filter a portion of this solution,discarding the first 15mLof the filtrate,and use the clear filtrate as the Test preparation.Use this solution within 20minutes after the addition of the Solvent.
Procedure— Immediately place the cell containing the solution under test in the cell compartment of a spectrophotofluorimeter,and allow to equilibrate for 2minutes.Concomitantly measure the intensities of the fluorescence of the Test preparationand the Standard preparationat 444nm using an excitation wavelength of 305nm.Calculate the percentage of salicylic acid in the portion of Capsules taken by the formula:
10,000(C/a)(IU/IS),
in which Cis the concentration,in mg per mL,of USP Salicylic Acid RSin the Standard preparation;ais the quantity,in mg,of aspirin in the portion of Capsules taken to prepare the Test preparation,based on the labeled amount;and IUand ISare the fluorescence intensity readings obtained from the Test preparationand the Standard preparation,respectively.[NOTE—If the intensity of the Test preparation greatly exceeds that of the Standard preparation,immediately transfer 5.0mLof the Test preparation to a 50-mLvolumetric flask,dilute with Solvent to volume,and mix.Immediately determine the intensity of this solution,and calculate the percentage of salicylic acid in the portion of Capsules taken by the formula:
100,000(C/a)(IU/IS).]
Not more than 3.0%is found.
Assay—
0.01M Phosphate buffer —Dissolve 1.361g of monobasic potassium phosphate in 1000mLof water,and mix.
Mobile phase —Prepare a suitable mixture of 0.01M Phosphate buffer and methanol (550:450),and adjust with phosphoric acid to a pHof 3.9.Pass through a suitable filter of 0.5-µm or finer porosity.Make adjustments if necessary (see System Suitabilityunder Chromatography á621ñ).
pH2.5Buffer —Prepare a mixture of 0.01M Phosphate buffer and methanol (550:450),and adjust with phosphoric acid to a pHof 2.5±0.05.
Aspirin standard stock solution —Dissolve an accurately weighed quantity of USP Aspirin RSin pH2.5Buffer to obtain a solution having a known concentration of about 1.6mg per mL,sonicating and shaking the solution,if necessary,to achieve complete dissolution.Use this solution within 24hours.
Standard preparation —Dissolve accurately weighed quantities of USP Butalbital RS,USP Caffeine RS,and USP Codeine Phosphate RSquantitatively in Aspirin standard stock solution to obtain a solution having known concentrations of about 1.6Jmg of USP Butalbital RS,1.6J¢mg of USP Caffeine RS,and 1.6J¢¢mg of USP Codeine Phosphate RSper mL,J,J¢,and J¢¢being the ratios of the respective labeled amounts,in mg,of butalbital,caffeine,and codeine phosphate to the labeled amount,in mg,of aspirin per Capsule,sonicating and shaking the solution,if necessary,to achieve complete dissolution.
Salicylic acid solution —Prepare a solution of salicylic acid in pH2.5Buffer containing about 0.1mg per mL.Pass this solution through a suitable filter of 0.5µm or finer porosity.
Assay preparation —Remove,as completely as possible,the contents of not fewer than 20Capsules.Transfer an accurately weighed portion of the powder,equivalent to about 325mg of aspirin,to a 200-mLvolumetric flask,dilute with pH2.5Buffer to volume,sonicate for about 30minutes,and mix.Pass a portion of this solution through a suitable filter of 0.5µm or finer porosity,and use the filtrate as the Assay preparation.Use this solution within 24hours.[NOTE—Reserve the remaining portion of the powder for the test for Limit of free salicylic acid.
Chromatographic system (see Chromatography á621ñ)— The liquid chromatograph is equipped with a detector set at the wavelength of the isosbestic point of aspirin and salicylic acid at about 277nm and a 210-nm detector,and a 3.9-mm ×30-cm column that contains packing L1and is maintained at 35±1.The flow rate is about 1mLper minute.Chromatograph the Standard preparation,and record the peak responses as directed for Procedure:the relative retention times are about 0.3for codeine,0.45for caffeine,0.6for aspirin,and 1.0for butalbital;the resolution,R,between the caffeine and aspirin peaks is not less than 2.0;the column efficiency determined from the butalbital peak is not less than 2000theoretical plates;and the relative standard deviations of the codeine,caffeine,aspirin,and butalbital responses for replicate injections are not more than 2.0%.Inject 10µLof the Salicylic acid solution,and record the peak response as directed for Procedure:the salicylic acid peak has the same retention time as that of the aspirin peak obtained in the chromatogram of the Standard preparation.[NOTE—If the retention time of the salicylic acid peak differs from that of the aspirin peak,adjust the pHof the Mobile phase with 0.2Npotassium hydroxide or 1Mphosphoric acid so that the salicylic acid peak has the same retention time as that of the aspirin peak.The retention time of the salicylic acid peak decreases about 0.3minute for each 0.1pHincrease.The retention time of the aspirin peak is essentially unaffected by such pHadjustments.]
Procedure— [NOTE—Use peak heights where peak responses are indicated.]Separately inject equal volumes (about 10µL)of the Standard preparationand the Assay preparationinto the chromatograph,record the chromatograms,using the 277-nm detector to record the caffeine and aspirin peak responses and the 210-nm detector to measure the codeine and butalbital responses,and measure the peak responses for the major peaks.Calculate the quantities,in mg,of caffeine (C8H10N4O2),aspirin (C9H8O4),and butalbital (C11H16N2O3)in the portion of Capsules taken by the same formula:
200C(rU/rS),
in which Cis the concentration,in mg per mL,of the appropriate USP Reference Standard in the Standard preparation;and rUand rSare the peak responses of the corresponding analyte obtained from the Assay preparationand the Standard preparation,respectively.Calculate the quantity,in mg,of codeine phosphate (C18H21NO3·H3PO4·½H2O)in the portion of Capsules taken by the formula:
(406.37/397.37)(200C)(rU/rS),
in which 406.37and 397.37are the molecular weights of codeine phosphate hemihydrate and anhydrous codeine phosphate,respectively;Cis the concentration,in mg per mL,of USP Codeine Phosphate RSin the Standard preparation;and rUand rSare the codeine peak responses obtained from the Assay preparationand the Standard preparation,respectively.Correct the amount of aspirin obtained for the amount of salicylic acid present by the formula:
A-(0.01FA),
in which Ais the quantity,in mg,of aspirin in the portion of Capsules taken to prepare the Assay preparation;and Fis the percentage of salicylic acid obtained in the test for Limit of free salicylic acid.
Auxiliary Information— Staff Liaison:Ravi Ravichandran,Ph.D.,Senior Scientist
Expert Committee:(PA3)Pharmaceutical Analysis 3
USP28–NF23Page 308
Phone Number:1-301-816-8330